Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Vacaville Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning and service in Vacaville. That means we clean, diagnose, repair and install Gelco caps, screens and damper assemblies without any tie to the manufacturer, so the only thing driving our recommendations is what your flue actually needs. Vacaville’s mix of mid-century masonry fireplaces and newer factory-built units means a Gelco cap here faces real work every season. We are not affiliated with or authorized by Gelco; we’re an independent provider that knows the brand’s parts and how they age.

Call (844) 797-8347. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Trust Chimney Sweep Vacaville for Your Gelco Chimney Cleaning?
Our technicians have up to 9 years of experience, and a lot of that time has been spent on Gelco equipment: top-mount multi-flue caps, stainless single-flue caps, spark arrestor screens and replacement damper assemblies. We’ve learned how each one fails in Vacaville conditions, which matters more than a brand name on a brochure.
When we service a Gelco cap or damper, we use quality parts that fit it. That means OEM or exact-fit Gelco-compatible components when the flue dimensions and mounting pattern allow, and a properly sized stainless aftermarket cap when the original line is discontinued. We don’t carry genuine Gelco parts as a dealer, and we’re not factory-trained by Gelco. What we offer instead is honest diagnosis, parts that fit correctly, and service that respects the manufacturer’s warranty on the rest of your system.
Vacaville homeowners get a straight answer: can this cap be cleaned, can it be repaired, or does it need to come off and be replaced? That’s the question we answer on every visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Vacaville
Gelco caps and dampers fail in predictable ways. Here are the ones we see most often, and why they happen.
- Screen corrosion and tearing at the mesh-to-frame weld. The weld is where a spark arrestor screen takes the most stress, and in Vacaville’s damp winters the mesh corrodes first. Once the screen tears, birds and debris get into the flue, and the spark protection you’re relying on in a high-fire-hazard area is gone. Screen replacement is usually straightforward if the frame is still sound.
- Loosened mounting legs and an off-center cap. Wind works the legs loose over time, and a Gelco top-mount or single-flue cap that shifts off-center exposes the flue to rain and downdraft. You’ll often hear a rattle on windy days before you see the problem. Reseating the cap and re-tightening the mounting hardware usually solves it.
- Rust-through at the seams of painted steel caps. Painted steel caps rust at the seams first. Rust then drips down onto the crown and flashing, leaving brown stains that look like a masonry problem when the cap is actually the source. Replacing with a stainless unit stops the staining.
- Damper plates that bind or won’t seal. A Gelco replacement damper whose pivot hardware has corroded won’t close all the way. That means heat loss up the flue when the fireplace is idle and smoke rollback into the room when it isn’t. Servicing or replacing the pivot hardware is often all it takes.
- Damper linkage that sticks after a summer of disuse. In Vacaville’s hot, dry summers, a damper that sits closed for months can bind at the plate edge. The plate feels stuck, but the cause is usually dried soot and corrosion at the pivot, not a failed assembly.
Gelco Parts & Our Repair-vs-Replace Approach
When we service Gelco equipment, we reach for OEM or exact-fit Gelco-compatible caps, screens and damper hardware whenever the flue dimensions and mounting pattern allow. If the original line is discontinued, a quality aftermarket stainless cap sized to your flue does the job better than a mismatched part. We don’t claim to stock genuine Gelco parts, and we’re not a Gelco dealer. What we do is fit parts correctly the first time.
Our rule is simple: repair the cap, screen or damper whenever the frame and crown are sound. Replace only when rust or distortion has compromised the mounting surface itself. A rusted screen on a solid frame is a repair. A cap whose legs have pulled free of a rusted crown is a replacement, because the mounting surface won’t hold a new cap. If you’re not sure which side of that line your cap falls on, call (844) 797-8347 and we’ll tell you what to look for before you book.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We inspect the flue, the cap and the damper, checking the screen welds, the mounting legs, and whether the damper plate seats fully. We photograph what we find so you can see it yourself.
- 2
Repair or install. Depending on what the inspection shows, we clean and reseat the existing cap, replace a torn screen, service the damper pivot, or install a correctly sized replacement cap or damper assembly.
- 3
Test. We test the damper for a full seal, check that smoke drafts properly, and confirm the cap sits centered and secure. If a screen was replaced, we verify it’s seated in the frame.
- 4
Warranty review. We document the work and explain which parts carry a manufacturer warranty and which are on our workmanship. If your Gelco cap is still under its own warranty, we tell you what to do before any repair voids it.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Vacaville
We work on the full range of Gelco chimney caps and accessories that homeowners in Vacaville rely on. That includes top-mount multi-flue caps, stainless single-flue caps, chimney caps with spark arrestor screens, and replacement damper assemblies. Whether your cap needs a screen cleaned, a seam inspected, a mounting leg tightened, or the whole assembly replaced, we handle it.

Vacaville’s high-fire-hazard designation makes spark arrestor screen maintenance a real priority. A torn screen isn’t just a draft problem in this climate; it’s a fire concern. We check screens on every visit and tell you when a repair is enough and when it isn’t.
We Also Service These Brands
We’re not tied to one product line. Alongside Gelco, we service and install DuraFlex liner systems and HeatShield resurfacing materials, which lets us handle a Gelco cap and damper job while also addressing a worn liner if the inspection calls for it. That multi-brand range is what keeps a single visit from turning into a chain of separate contractors. One team, one set of recommendations.
FAQs – Gelco Chimney Cleaning Service in Vacaville
No. We are an independent Gelco service provider, not affiliated with or authorized by Gelco. We have no manufacturer tie, so our only incentive is an honest read on what your cap, screen or damper needs.
Yes. We use OEM or exact-fit Gelco-compatible caps, screens and damper hardware when the flue dimensions and mounting pattern allow, and a quality aftermarket stainless cap when the original line is discontinued. We don’t claim to stock genuine Gelco parts.
Most Gelco cap, screen and damper work is completed in a single visit. A screen replacement or cap reseat is usually under an hour; a full cap replacement takes longer because of the mounting and sealing. We give you a written estimate before starting.
We service top-mount multi-flue caps, stainless single-flue caps, chimney caps with spark arrestor screens, and replacement damper assemblies. If you’re not sure which one you have, we can identify it during the inspection.
Proper service shouldn’t void a manufacturer warranty, but improper repair can. Before we touch anything, we tell you if your cap is still under its own warranty and what the manufacturer requires. Our work doesn’t interfere with those terms. Call (844) 797-8347 if you want to confirm before booking.
A typical Gelco chimney cleaning and inspection in Vacaville runs $180 – $340, with cap reseating or screen repair adding $75 – $180 and a full cap replacement in the $200 – $500 range depending on size and material. Stainless caps cost more than painted steel but stop the rust staining. The written estimate you get before any work sets the final price. Call (844) 797-8347 for an exact quote – estimates are free.
Book Your Gelco Service in Vacaville, CA
If you’ve noticed a torn screen, a crooked cap, rust streaks on your crown, or a damper that won’t close, we can tell you what’s wrong and what it takes to fix it. We service Gelco caps and dampers as an independent provider, so the diagnosis is honest and the parts fit. Call (844) 797-8347 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Vacaville.