Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Woodland, CA
We provide independent Gelco service across Woodland, and the one thing that makes our Gelco work here different is what Woodland homeowners burn. This is orchard country, and a lot of the creosote we pull from Gelco wood inserts comes from cheap prunings and scrap wood rather than clean, seasoned fuel. That single habit changes how often a Gelco unit needs sweeping, how the firebox liner wears, and what we find when we run a camera up the flue. Our technicians have up to 9 years of experience, and we focus only on chimneys. Call (844) 797-8347 to book a sweep or inspection. We answer 24/7.

Why Woodland Residents Choose Us for Gelco Service
We’re chimney-only specialists, which matters when your equipment is a Gelco wood or gas insert that needs the right clearances and the right parts. We aren’t a general handyman outfit squeezing a sweep between fence repairs. Every job we take is inside our trade.
Woodland homeowners come to us for a few reasons. We know the Gelco product types that show up in this valley, we recommend quality parts that actually fit the unit, and we explain what we find before we touch anything. Scheduling is straightforward: you tell us what you’re seeing (smoke in the room, a smell from the gas insert, a cap that’s come loose), we book a visit, and the technician confirms the scope on arrival.
We’re not affiliated with or authorized by Gelco. We’re an independent shop, and that independence is the point: we recommend the parts and the repair that fit your insert, whether that’s an OEM component or a quality aftermarket part where that makes sense. You can read more about our approach on our Gelco service page, or see how we work across Woodland.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Woodland
- Hardened creosote in Gelco wood inserts. Burning orchard prunings and scrap wood loads a flue with sticky, then glazed, creosote faster than clean fuel does. During tule fog inversions the draft weakens, and that same creosote load is what sends smoke back into the room. We remove it with rotary tools and check the firebox liner while we’re in there.
- Cracked or warped firebox liners and baffles. Older Gelco wood inserts take a beating from hot, fast orchard-wood fires, and the liners and baffles are the first to show it. A cracked liner changes how the unit burns and can let heat reach places it shouldn’t.
- Blocked or deteriorating vent caps and clogged flue passages. Uncapped chimneys in Woodland’s older downtown draw birds and squirrels straight from the surrounding orchards. Nests plug the flue and block the vent cap, and the gas insert starts running poorly or spilling.
- Worn gaskets, damper seals, and draft hoods. Chimneys sit unused through Woodland’s hot, dry summers, and seals dry out and shrink. When fall arrives, poor combustion and spillage show up on the first cold evening.
- Obstructed flues from nesting debris and dried hulls. The first-rain calls we get often turn up nests and dried almond hulls pulled from the flue before a sweep even starts. A cap goes a long way toward preventing the repeat.
Gelco Service in Woodland: What Local Conditions Mean for Your Equipment
Woodland’s older downtown and east-side homes are the heart of this. They were built with fireplaces sized and fired for orchard-adjacent wood and agricultural debris, and many now hold Gelco inserts vented into flues that were originally cut for open-hearth fires. Those old flues are often undersized for a modern insert and sometimes unlined entirely, which you can’t see from the firebox. A Level 2 inspection is what reveals it. Add tule fog and winter inversions that hold smoke low over the valley floor, and the same clearance and liner problems turn into real draft failures and smoke-back on the coldest evenings. That’s the difference here. A generic sweep might clear the flue and leave, but the equipment in a downtown Woodland bungalow usually needs the liner and clearance question answered before the next fire.
Gelco Models & Products We Service in Woodland
We handle the Gelco product types that show up in Woodland homes: the Gelco Wood Burning Fireplace Insert, the Gelco Gas Fireplace Insert, the Gelco Zero-Clearance Fireplace, and the Gelco Direct-Vent Gas Fireplace. Each brings its own service needs. Wood inserts and zero-clearance fireplaces most often need creosote removal and a look at the liner. Gas inserts and direct-vent units lean more on vent caps, gaskets, and flue passages. Because we’re an independent shop, we choose parts that fit: OEM Gelco parts are preferred for critical components like liners, baffles, and vent kits, since they keep the clearances correct, while quality aftermarket parts are fine for caps, dampers, and common wear items.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Woodland
Pricing is set per job by a written estimate. A standard sweep costs less than a Level 2 inspection, and a repair or liner job costs more. What drives the number for a Gelco unit in Woodland is creosote severity (glazed creosote takes more work than soot), whether the flue needs a camera inspection, cap condition, and whether the firebox liner, baffles, or gaskets need replacing. A free estimate walks the job, runs the camera, and puts the price in writing before you commit. Call (844) 797-8347 for an exact quote. Estimates are free.
Serving Woodland, CA – Our Local Coverage Area
We serve Woodland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Woodland
Once a year is the usual baseline, and more often if you burn orchard prunings and scrap wood. Cheap, dirty fuel builds creosote faster. Call (844) 797-8347 for an exact quote and a sweep booked around your burning season.
A smell or soot on the glass usually points to worn gaskets, a dirty flue passage, or a blocked vent cap. A service visit traces it to the source and repairs it. Call (844) 797-8347 for an exact quote.
Yes, and those are the installations that most need a Level 2 inspection, since old masonry flues were often built for open-hearth fires and may be undersized or unlined for the insert.
A Level 2 inspection includes a camera run up the flue and a look at clearances, the firebox liner, the damper, the cap, and the venting. It’s the inspection that reveals problems you can’t see from the firebox.
Repair is usually the right call when the firebox is solid and the damage is localized; a cracked or warped firebox with obsolete venting usually warrants replacement after inspection. Call (844) 797-8347 for an exact quote. Estimates are free.
Service Areas Near Woodland
We serve Woodland and the surrounding valley, including Monument Hills, Davis, Esparto, Vacaville, and Hartley. If your Gelco insert is in one of these towns, call and we’ll book a visit.
Book Your Gelco Service in Woodland Today
Book a Gelco sweep, repair, or Level 2 inspection in Woodland and know what’s inside your flue before the next fire. The estimate is free, and the price is set in writing before any work begins. Call (844) 797-8347. We answer 24/7.
Written by the team at Chimney Sweep Vacaville.